Hi All


Sorry again for the delay in our new post. We've been busy but that's no excuse.

You may have seen our recent video on You Tube about rust prevention and treament. If not, please visit here 

One of our most popular range of coatings is our Corroless range. Corroless has been around for nearly half a century and as such has built a large portfolio of proven products used for treating and protecting against corrosion.

As we are Corroless North West, we are ideally placed to offer some of these products to the end user - whether it be for treatment of vehicles & chassis, to someone who wants to give their railings and gates the best treatment possible.

Below we aim to give a brief technical insight into the main products available, what they do and how to use them together to form the best paint system for your needs:

Corroless S Rust Primer

This is the base of any system you want to use. Corroless S is a red coloured primer. It not only protects against future corrosion but importantly chemically modifies existing rust, stopping it in it's tracks. 

Applied by brush, roller or spray, 2 coats, although designed to be used under one of the following products, will offer, if left uncoated, several years life to steel work. It should be thinned with Corroless thinners if applying by spray.

Often called a Rust Control Primer, this is a primer that is different to standard oxide primers due to the Corroles pigments it contains.

Corroless CIO - Chassis In One

This contains the same rust kiling properties as the primer above, but also contains self leafing glass flake. This makes it highly impervious to water ingress, while also giving it an exceptionally tought finish. Ideal for chassis on 4x4 for example as it can cope with off roading and extreme environments.

Available in Black only

It can be applied direct to steel, direct to sound rust, and over Corroless S (at least 48-72 hours should be left before overcoating Corroless S with CIO)

2 coats of this, over 2 coats of Corroless S, gives a 10-15 year life span.

It can be applied to abraded or etch primed aluminium or over Twashed or etch Galvanised. 

Corroless RF16 Gloss Top Coat

This is a gloss top coat desinged for application over either of the above products. It can be made in any RAL or BS colour and in any quantity with no minimum order.

It contains self leafing glass flake as does the Chassis In One above

Corroless CCI 355 HD Grease

Supplied in a 400g grease tube - can be applied to gearing, ropes, winches, bearings etc - contains Corroless Rust Inhibiting vapours which are given off over time to protect against rust both by surface contact and against atmospheric damp.

Corroless CCI Wax

Available both in a 500ml aerosol in translucent brown, or by can form in clear, or clear wax in aerosol form (400ml)

Applied to cavities, chassis, pipes, around suspension and hard to reach areas.

Gives up to 4 years protection in aggressive environments by both contact and rust inhibiting vapours

CCI Devices

Available as pads and tape - applied inside ECUs, fuse boxes, junction boxes, tool boxes - 1 x 2" tape or 1 x pad will protect up to 1 cubit foot of space against atmospheric moisture for up to 2 years. Used in the offshore industry with a proven track record


Hope the above has helped a little in knowing what can be used where and when

If you want to give your project the best then choose Corroless

Keep an eye out in the near future for our new branding and product range being launched

See you soon 


Posted in Paint By

Andy Case